Blob Blame History Raw
#
# set +o errexit -o noglob -o nounset is assumed.
#

buildp_init_args() {
	local _group="" _last_pkg="" _pkg_names_unknown="" _rc=0; _status="";
	if [ -z "${BUILD_HNAME:-}" ]\
	&& ! BUILD_HNAME="$(hostname)"; then
		_rc=1; _status="Error: failed to obtain hostname.";
	elif [ "${ARG_DUMP_ON_ABORT:-0}" -eq 1 ]\
	&& [ "${ARG_RELAXED:-0}" -eq 1 ]; then
		_rc=1; _status="Error: --dump-on-abort excludes -R.";
	elif [ "${ARG_AS_NEEDED:-0}" -eq 1 ]\
	&& [ -e "${PREFIX}/build.gitref" ]\
	&& [ "$(git rev-parse HEAD)" = "$(cat "${PREFIX}/build.gitref")" ]; then
		_rc=0; _status="Git repository has not changed since last build and --as-needed was specified.";
	else	case "${ARG_FETCH_FORCE}" in
		ipv4)	DEFAULT_GIT_ARGS="$(rtl_lconcat "-4" "${DEFAULT_GIT_ARGS}")";
			DEFAULT_WGET_ARGS="$(rtl_lconcat "-4" "${DEFAULT_GIT_ARGS}")"; ;;
		ipv6)	DEFAULT_GIT_ARGS="$(rtl_lconcat "-6" "${DEFAULT_GIT_ARGS}")";
			DEFAULT_WGET_ARGS="$(rtl_lconcat "-6" "${DEFAULT_GIT_ARGS}")"; ;;
		esac;
		case "${ARG_RESTART}" in
		\*\*\*[a-zA-Z]*)
				ARG_RESTART="${ARG_RESTART#\*\*\*}"; ARG_RESTART_RECURSIVE=3; ;;
		\*\*[a-zA-Z]*)	ARG_RESTART="${ARG_RESTART#\*\*}"; ARG_RESTART_RECURSIVE=2; ;;
		\*[a-zA-Z]*)	ARG_RESTART="${ARG_RESTART#\*}"; ARG_RESTART_RECURSIVE=1; ;;
		ALL)		ARG_RESTART_AT=ALL; ARG_RESTART_RECURSIVE=2; ;;
		LAST)		ARG_RESTART_AT=ALL; ARG_RESTART_RECURSIVE=0;
				if [ -n "${DEFAULT_BUILD_LAST_FAILED_PKG_FNAME}" ]\
				&& [ -e "${DEFAULT_BUILD_LAST_FAILED_PKG_FNAME}" ]; then
					_last_pkg="$(cat "${DEFAULT_BUILD_LAST_FAILED_PKG_FNAME}")";
					rtl_fileop rm "${DEFAULT_BUILD_LAST_FAILED_PKG_FNAME}";
					rtl_state_clear "${BUILD_WORKDIR}" "${_last_pkg}";
					ARG_RESTART="${_last_pkg}";
				else
					_rc=1; _status="Error: cannot rebuild last failed package.";
				fi; ;;
		esac;
		if [ "${_rc:-0}" -eq 0 ]; then
			case "${ARG_RESTART}" in
			*:*)		ARG_RESTART_AT="${ARG_RESTART#*:}"; ARG_RESTART="$(rtl_llift "${ARG_RESTART%%:*}" "," " ")"; ;;
			*)		ARG_RESTART="$(rtl_llift "${ARG_RESTART}" "," " ")"; ARG_RESTART_AT=ALL; ;;
			esac;
			if ! ex_pkg_load_groups; then
				_rc=1; _status="Error: failed to load build groups.";
			else	if ! rtl_lmatch "${ARG_DIST}" "rpm" ","; then
					EX_PKG_BUILD_GROUPS="$(rtl_lfilter "${EX_PKG_BUILD_GROUPS}" "host_deps_rpm")";
				fi;
				if [ -z "${BUILD_GROUPS}" ]; then
					BUILD_GROUPS="${EX_PKG_BUILD_GROUPS}";
				else	for _group in ${BUILD_GROUPS}; do
						if ! rtl_lmatch "${EX_PKG_BUILD_GROUPS}" "${_group}"; then
							_rc=1; _status="Error: unknown build group \`${_group}'."; break;
						fi;
					done;
				fi;
				if [ "${_rc:-0}" -eq 0 ]; then
					if [ -n "${ARG_DIST}" ]; then
						BUILD_GROUPS="$(rtl_lconcat "$(rtl_lfilter "${BUILD_GROUPS}" "dist")" "dist")";
					fi;
					if [ -n "${ARG_RESTART}" ]; then
						for _pkg_name in ${ARG_RESTART}; do
							if ! ex_pkg_find_package "${BUILD_GROUPS}" "${_pkg_name}" >/dev/null; then
								_pkg_names_unknown="$(rtl_lconcat "${_pkg_names_unknown}" "${_pkg_name}")";
							fi;
						done;
						case "$(rtl_llength "${_pkg_names_unknown}")" in
						0)	;;
						1)	_rc=1; _status="Error: unknown package \`${_pkg_names_unknown}'."; ;;
						*)	_rc=1; _status="Error: unknown packages: $(rtl_subst "${_pkg_names_unknown}" " " ", ")"; ;;
						esac;
					fi;
					if [ "${_rc}" -eq 0 ]; then
						case "${ARG_VERBOSE:-0}" in
						0)	rtl_fileop_set_log 0; rtl_log_set_lvl 0; ;;
						1)	rtl_fileop_set_log 0; rtl_log_set_lvl 2; ;;
						2)	rtl_fileop_set_log 0; rtl_log_set_lvl 2; ;;
						3)	rtl_fileop_set_log 0; rtl_log_set_lvl 2; ;;
						4)	rtl_fileop_set_log 1; rtl_log_set_lvl 3; ;;
						*)	_rc=1; _status="Error: invalid verbosity level (max. -vvvv)"; ;;
						esac;
					fi;
				fi;
			fi;
		fi;
	fi; return "${_rc}";
};

buildp_init_env() {
	local _fname="" _rc=0; _status="";
	if ! cd "${0%/*}"; then
		printf "Error: failed to change working directory to \`${0%/*}'." >&2; exit 1;
	elif ! umask 022; then
		printf "Error: failed to set umask(2).\n" >&2; exit 1;
	elif ! BUILD_USER="$(id -nu)"; then
		printf "Error: failed to obtain username." >&2; exit 1;
	else	for _fname in $(find subr -name *.subr); do
			if ! . "${_fname}"; then
				printf "Error: failed to source \`%s'.\n" "${_fname}"; exit 1;
			fi;
		done;
	fi; return "${_rc}";
};

buildp_init_files() {
	local _log_last_fname="" _log_last_num=1 _rc=0; _status=""
	if ! rtl_fileop mkdir "${BUILD_DLCACHEDIR}" "${BUILD_WORKDIR}"\
	|| rtl_lmatch "${ARG_DIST}" "rpm" ","\
	&& ! rtl_fileop mkdir "${PREFIX_RPM}"; then
		_rc=1; _status="Error: cannot create build directories.";
	elif [ -e "${DEFAULT_BUILD_STATUS_IN_PROGRESS_FNAME}" ]; then
		_rc=1; _status="Error: another build targeting this architecture and build type is currently in progress.";
	elif ! rtl_clean_env "${DEFAULT_CLEAR_ENV_VARS_EXCEPT}"; then
		_rc=1; _status="Error: failed to clean environment.";
	elif ! rtl_check_path_vars "${DEFAULT_CHECK_PATH_VARS}"; then
		_rc=1; _status="${_status}";
	else	touch "${DEFAULT_BUILD_STATUS_IN_PROGRESS_FNAME}";
		if [ -e "${DEFAULT_BUILD_LOG_FNAME}" ]; then
			while [ -e "${DEFAULT_BUILD_LOG_FNAME}.${_log_last_num}" ]; do
				: $((_log_last_num+=1));
			done;
			_log_last_fname="${DEFAULT_BUILD_LOG_FNAME}.${_log_last_num}";
			rtl_fileop mv "${DEFAULT_BUILD_LOG_FNAME}" "${_log_last_fname}";
			rtl_fileop ln_symbolic "${_log_last_fname}" "${DEFAULT_BUILD_LOG_LAST_FNAME}";
		fi;
		rtl_fileop touch "${DEFAULT_BUILD_LOG_FNAME}"; rtl_log_set_fname "${DEFAULT_BUILD_LOG_FNAME}";
		if rtl_lmatch "${ARG_CLEAN_BUILDS}" "prefix" ","; then
			trap "rm -f \"${DEFAULT_BUILD_STATUS_IN_PROGRESS_FNAME}\" 2>/dev/null; rtl_log_msg fatalexit \"Build aborted.\"" HUP INT TERM USR1 USR2;
			rtl_log_msg info "-C prefix specified, cleaning prefix...";
			for _pname in ${DEFAULT_CLEAR_PREFIX_PATHS}; do
				if ! rtl_fileop rm "${PREFIX}/${_pname}"; then
					_rc=1; _status="Error: failed to remove \`${PREFIX}/${_pname}'."; break;
				fi;
			done;
			trap - HUP INT TERM USR1 USR2;
		fi;
		export PATH="${PREFIX}/bin${PATH:+:${PATH}}";
	fi;
	return "${_rc}";
};

buildp_init_getopts() {
	local _arg="" _opt="" _rc=0 _shiftfl=0 OPTIND=0; _status="";
	: ${ARCH:="nt64"}; : ${BUILD:="debug"};
	ARG_AS_NEEDED=0; ARG_CLEAN_BUILDS=""; ARG_DEBUG_MINIPIX=0; ARG_DIST=1; ARG_DUMP_IN="";
	ARG_DUMP_ON_ABORT=0; ARG_FETCH_FORCE=0; ARG_PARALLEL=1; ARG_RELAXED=0; ARG_RESTART="";
	ARG_RESTART_AT=""; ARG_RESTART_RECURSIVE=""; ARG_VERBOSE=0;
	while [ "${#}" -gt 0 ]; do
		case "${1}" in
		--as-needed)	ARG_AS_NEEDED=1; _shiftfl=1; ;;
		--dump-in)	if [ "${#}" -ge 2 ]; then
					ARG_DUMP_IN="${2}"; ARG_DUMP_ON_ABORT=1; _shiftfl=2;
				else
					_rc=1; _status="Error: missing argument to option --dump-in.";
				fi; ;;
		--dump-on-abort)
				ARG_DUMP_ON_ABORT=1; _shiftfl=1; ;;
		--debug-minipx)	ARG_DEBUG_MINIPIX=1; _shiftfl=1; ;;
		-v*)		_opt="${1#-}"; while [ -n "${_opt}" ]; do
					: $((ARG_VERBOSE+=1)); _opt="${_opt#?}";
				done; _shiftfl=1; ;;
		*)		_shiftfl=0; ;;
		esac;
		if [ "${_rc}" -ne 0 ]; then
			break;
		elif [ "${_shiftfl}" -gt 0 ]; then
			shift "${_shiftfl}"; continue;
		elif getopts a:b:C:D:Fhp:Pr:R _opt; then
			case "${_opt}" in
			a)	ARCH="${OPTARG}"; ;;
			b)	BUILD="${OPTARG}"; ;;
			C)	ARG_CLEAN_BUILDS="${OPTARG}"; ;;
			D)	ARG_DIST="${OPTARG}"; ;;
			F)	ARG_FETCH_FORCE=1; ;;
			h)	cat etc/build.usage; exit 0; ;;
			p)	ARG_PARALLEL="${OPTARG}"; ;;
			P)	ARG_PARALLEL="auto";
				if [ -n "${2:-}" ]\
				&& rtl_isnumber "${2}"; then
					_rc=1; _status="Error: maximum parallelisation job count is set with the \`-p jobs' option."; break
				fi; ;;
			r)	ARG_RESTART="${OPTARG}"; ;;
			R)	ARG_RELAXED=1; ;;
			*)	cat etc/build.usage; exit 1; ;;
			esac; shift $((${OPTIND}-1)); OPTIND=1;
		else
			break;
		fi;
	done;
	if [ "${_rc:-0}" -eq 0 ]; then
		while [ ${#} -gt 0 ]; do
			if [ "${1#=}" != "${1}" ]; then
				BUILD_GROUPS_INHIBIT_DEPS=1; _arg="${1#=}";
			else
				_arg="${1}";
			fi;
			case "${_arg}" in
			*=*)		rtl_set_var_unsafe "${_arg%%=*}" "${_arg#*=}"; ;;
			[^a-zA-Z]*)	_rc=1; _status="Error: build group names must start with [a-zA-Z] (in argument \`${_arg}'.)"; ;;
			*[^_a-zA-Z]*)	_rc=1; _status="Error: build group names must not contain [^_a-zA-Z] (in argument \`${_arg}'.)"; ;;
			*)		BUILD_GROUPS="$(rtl_lconcat "${BUILD_GROUPS}" "${_arg}")"; ;;
			esac; shift;
		done;
		if [ "${_rc:-0}" -eq 0 ]; then
			case "${ARG_PARALLEL}" in
			auto)	if ! ARG_PARALLEL="$(rtl_get_cpu_count)"; then
					_rc=1; _status="Error: failed to get CPU count.";
				else
					ARG_PARALLEL=$((${ARG_PARALLEL}/2));
				fi; ;;
			"")	ARG_PARALLEL=1; ;;
			*)	if ! rtl_isnumber "${ARG_PARALLEL}"; then
					_rc=1; _status="Error: invalid jobs count \`${ARG_PARALLEL}'.";
				fi; ;;
			esac;
			if [ "${_rc:-0}" -eq 0 ]; then
				DEFAULT_BUILD_CPUS="${ARG_PARALLEL}";
			fi;
		fi;
	fi;
	return "${_rc}";
};

buildp_init_getopts_help() {
	local _opt="";
	while getopts a:b:C:D:Fhp:Pr:R _opt 2>/dev/null; do
	case "${_opt}" in
	h)	cat etc/build.usage; exit 0; ;;
	esac; done; shift $((${OPTIND}-1));
};

buildp_init_prereqs() {
	if ! rtl_check_prereqs \
			awk bunzip2 bzip2 cat chmod cmake cp date find flock	\
			g++ gcc git grep gunzip gzip hostname id install kill	\
			ln lzip make mkdir mkfifo mktemp mv paste patch perl	\
			pgrep pkill printf readlink rm sed sha256sum sort	\
			stat tail tar test touch tr uniq wget xz zip; then
		printf "%s\n" "${_status}" >&2; exit 1;
	elif ! (FNAME="$(mktemp)" && { trap "rm -f \"\${FNAME}\"" EXIT;		\
			sed -i'' -e '' "${FNAME}" >/dev/null 2>&1; }); then
		printf "Error: sed(1) in \${PATH} does not support the \`-i' option.\n" >&2; exit 1;
	fi;
};

build_init() {
	local _rc=0; _status="";
	if ! buildp_init_env			\
	|| ! buildp_init_getopts_help "${@}"	\
	|| ! buildp_init_prereqs		\
	|| ! buildp_init_getopts "${@}"		\
	|| ! ex_pkg_load_vars			\
	|| ! buildp_init_args			\
	|| ! buildp_init_files; then
		_rc=1; _status="${_status}";
	fi; return "${_rc}";
};

# vim:filetype=sh